Blog: facade advice and flexible stone
Practical articles on cladding facades with flexible stone: choosing a texture, installation, insulation, cost and common mistakes.
News
15.10.2026
Heavy or Lightweight Facade Cladding: Why Material Weight Affects a Building’s Durability
KORDEKO flexible tile weighs about 4 kg/m², porcelain stoneware 15–20, natural stone 20–35: on 100 m² that is 400 kg against 2–3.5 tonnes. When cladding weight matters more than price and looks: renovating older houses, insulated facades and complex architectural elements, and what lightweight cladding does not cancel.
Read more
News
15.10.2026
Why Facades Fade in the Sun and How the UV Resistance of Flexible Tile Keeps the Colour
Ultraviolet light gradually breaks down pigments and binders, and the facade loses its depth of colour, especially on the sunny side. Four factors that set the speed of fading, how the oxide pigments inside KORDEKO flexible tile differ from surface paint, why UV resistance alone is not enough and how to care for a facade without repainting.
Read more
News
15.10.2026
Heat, Frost and Temperature Swings: How Flexible Tile Protects the Facade
In summer the facade heats up, in winter it freezes, and between seasons it goes through sudden temperature jumps; every cycle of expansion and contraction loads the cladding and the adhesive. The three main risk factors, the properties of KORDEKO flexible tile from the technical data sheet, the role of insulation and five installation rules for hot and cold weather.
Read more
News
15.10.2026
Mineral Wool or Expanded Polystyrene: Which Insulation to Put Under Flexible Tile
Expanded polystyrene is cheaper, lighter and easier to install; mineral wool is vapour-permeable, non-combustible and better at damping noise. We compare both insulations on eight criteria, walk through the typical build-up of an insulated facade under KORDEKO flexible tile and explain why installation mistakes cost more than any saving on the material.
Read more
News
13.10.2026
Energy-Efficient Facade: How Flexible Tile Helps Reduce a Home’s Heat Loss
External walls can account for about 25–40 % of a home’s heat loss. Four causes: insufficient insulation, thermal bridges, installation mistakes and moisture. An honest word on the role of cladding: flexible tile does not replace insulation, but as the finishing layer it shields the system from water and UV. How an insulated facade is built and which mistakes cancel its effect.
Read more
News
13.10.2026
Why Rain Streaks Appear on Facades and How to Keep Walls Clean
Dark lines under windows and dirty marks near downpipes appear wherever rainwater runs down the wall instead of being led away from it. Five causes of streaks, how cladding texture affects soiling, which parts of the building need attention first, and how to care for flexible tile so the facade stays clean longer.
Read more
News
13.10.2026
How Long a House Facade Lasts: What Determines Cladding Durability
Render, porcelain tile, natural stone and flexible tile age differently, but the service life of a finish and the durability of a facade are not the same thing. Five factors that matter more than the material: substrate, moisture and frost, thermal movement, installation and maintenance. What is declared for KORDEKO flexible stone and why insulation and installation extend a facade’s life.
Read more
News
13.10.2026
Cheap Render or Flexible Tile: Which Facade Finish Pays Off Over the Years
Cheap render saves money at construction, but after 10–15 years the bill looks different: cracks, repainting, local repairs. We compare the two on six criteria in a table, work through two identical houses, explain why installation matters more than the material, and say when render is still the sensible choice.
Read more
News
13.10.2026
Eco-Friendly Facade Finishing: What KORDEKO Flexible Tile Is Made Of
What flexible tile is really made of: white cement, quartz sand or marble flour, acrylic dispersion, oxide pigments and a reinforcing membrane. What the technical data sheet says about safety, what an ISO 14001 certificate confirms and what it does not, and why composition should be judged together with the facade’s performance.
Read more
News
13.10.2026
Why Mold and Fungi Appear on Facades and How Flexible Tile Protects Walls
Dark stains and green deposits on a facade mean the wall gets wet regularly and never dries out. Five causes of dampness: constant moisture, shade, insulation mistakes, faulty junctions and damaged finishes. How a water-resistant cladding changes the picture, why correct insulation matters, and what to do when mold is already there.
Read more
News
13.10.2026
Why House Facades Crack and How Flexible Tile Helps Reduce Cracking
Facade cracks show up a few years after renovation even with good materials. We look at five causes: settlement, temperature swings, reinforcement mistakes, a weak substrate and moisture. Why an elastic mineral-polymer tile tolerates small movements, what it does not fix, and which installation conditions keep cracks away.
Read more
News
08.10.2026
Can You Clad an Old Facade Without Full Demolition?
Renovating an old house does not always mean stripping all the finish. When the existing plaster can stay as the substrate, when demolition is unavoidable, what to do with local damage and moisture, how the scheme changes with insulation, and a ten-question mini checklist before cladding.
Read more